Flat rooflights in Hythe: what is involved?
We handle flat rooflights across Hampshire, including Hythe. In short: fixed double or triple glazed rooflights for flat roofs and extensions. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Across the South East, single-storey kitchen extensions on 1930s semis and post-war detached houses are where most flat rooflights and lanterns go. Think of flat rooflights for kitchen extensions, side returns and flat-roofed back rooms.
Hythe sits about 5 km from Southampton and 9 km from Totton, and we cover the whole SO45 postcode district and the roads in between.
Choices for your Hythe project
- Integral or fitted blinds
- Double or triple glazing
- Rain sensor if paired with an opening unit
- Insulated kerb or timber upstand built to suit
- Frame colours: anthracite, black, white or RAL
- Double or triple glazed with a warm-edge spacer
- Inner pane laminated for safety overhead
What to check first
- The roof membrane must be dressed up the upstand before the unit goes on
- Needs a properly formed upstand — usually at least 150 mm above the finished roof surface (check the manufacturer's figure)
Do you need permission in Hythe?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Read the planning permission guide before you commit to a design.
Flat rooflights prices in Hythe
These are typical supply-and-fit ranges. For an address in Hythe, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
How the job runs
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
Related work in Hythe
Flat rooflights in Hythe: questions
Can a flat rooflight be walked on?
Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.
Can you fit into my existing flat roof?
Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.
Do flat rooflights leak?
A well-fitted flat rooflight should not leak. Leaks almost always come from the upstand or membrane detailing, not the glass unit, which is why the upstand height and the way the roof covering is dressed up and under the frame matter more than the brand.
Do I need to be at home for the survey in Hythe?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Do you fit flat rooflights in Hythe?
Yes. We survey and fit flat rooflights in Hythe and across Hampshire. Send your postcode and we will offer a survey date when we reply.
