Flat rooflights for Ryde: the essentials
We handle flat rooflights across the Isle of Wight, including Ryde. In short: fixed double or triple glazed rooflights for flat roofs and extensions. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Period cottages and conservation-area streets are common in the South East, so slim conservation rooflights are often the right choice. Flat rooflights suit kitchen extensions, side returns and flat-roofed back rooms.
Ryde sits about 8 km from Gosport and 9 km from Sandown, and we cover the whole PO33 postcode district and the roads in between.
Choices for your Ryde project
- Integral or fitted blinds
- Solar-control or self-cleaning outer pane
- Insulated kerb or timber upstand built to suit
- Plastered or lined internal reveal
- Rain sensor if paired with an opening unit
- Pairs with an opening unit where you also need ventilation
- Inner pane laminated for safety overhead
Things we check at survey
- Needs a properly formed upstand — usually at least 150 mm above the finished roof surface (check the manufacturer's figure)
- New openings in an existing roof need a structural check on joists
Do you need permission in Ryde?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Ryde
Guide prices for flat rooflights in Ryde are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
From enquiry to finished job
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Flat rooflights near Ryde
Other services in Ryde
Questions about flat rooflights in Ryde
Can you fit into my existing flat roof?
Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.
Double or triple glazing?
Double glazing suits most domestic jobs. Triple glazing improves thermal performance and cuts noise from rain, which is worth it over bedrooms or where the energy calculation is tight.
Can a flat rooflight be walked on?
Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.
Do I need to be at home for the survey in Ryde?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
How do I book a survey in Ryde?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
