How we approach flat rooflights in Canterbury
We handle flat rooflights across Kent, including Canterbury. In short: fixed double or triple glazed rooflights for flat roofs and extensions. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Across the South East, single-storey kitchen extensions on 1930s semis and post-war detached houses are where most flat rooflights and lanterns go. Think of flat rooflights for kitchen extensions, side returns and flat-roofed back rooms.
Jobs in Canterbury are planned around access: whether the roof can be reached from the garden, whether a hoist or crane is needed, and where we can park. We check this when we measure.
Choices for your Canterbury project
- Solar-control or self-cleaning outer pane
- Frame colours: anthracite, black, white or RAL
- Insulated kerb or timber upstand built to suit
- Rain sensor if paired with an opening unit
- Square, rectangular or long-format sizes
- Double or triple glazed with a warm-edge spacer
- Slim sightlines from inside — mostly glass, little frame
Things we check at survey
- Needs a properly formed upstand — usually at least 150 mm above the finished roof surface (check the manufacturer's figure)
- The roof membrane must be dressed up the upstand before the unit goes on
Planning and building rules for Canterbury
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
Our planning guide covers each nation in more detail.
What do flat rooflights cost in Canterbury?
Guide prices for flat rooflights in Canterbury are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
The process, step by step
- Send the details. Postcode, rough size and a photo of the roof and room.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Flat rooflights near Canterbury
Related work in Canterbury
Common questions
How long does it take?
Fitting into a prepared upstand usually takes a day. Forming a new opening in an existing roof, including making good inside, is often two to three days.
Can a flat rooflight be walked on?
Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.
Will it make the room too hot?
A big unglazed-to-sky area can add solar gain in summer. Solar-control glass, a blind, or pairing a fixed unit with an opening one keeps it comfortable.
Can you work alongside my builder in Canterbury?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
Is the survey in Canterbury free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
