What do flat rooflights in Rochester involve?
For Rochester homes and buildings we offer flat rooflights: fixed double or triple glazed rooflights for flat roofs and extensions. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Larger gardens in much of the South East mean deeper rear extensions, and deeper rooms need light from above rather than only from the doors. Flat rooflights suit kitchen extensions, side returns and flat-roofed back rooms.
From Rochester to Chatham, Strood and Gillingham, the same survey-first process applies: measure, specify, fix the price, then fit.
What you can choose
- Integral or fitted blinds
- Square, rectangular or long-format sizes
- Insulated kerb or timber upstand built to suit
- Rain sensor if paired with an opening unit
- Solar-control or self-cleaning outer pane
- Inner pane laminated for safety overhead
- Fixed units are simple, quiet and low-maintenance
Things we check at survey
- New openings in an existing roof need a structural check on joists
- Rooflights count toward glazing in an extension, which matters for Building Regulations energy and overheating rules
Consents for flat rooflights in Rochester
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Read the planning permission guide before you commit to a design.
Guide prices for Rochester
These are typical supply-and-fit ranges. For an address in Rochester, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
What happens next
- Send the details. Postcode, rough size and a photo of the roof and room.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Agree the quote. You approve the specification and price before anything is ordered.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Neighbouring towns
Other services in Rochester
Common questions
Can a flat rooflight be walked on?
Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.
Can you fit into my existing flat roof?
Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.
How long does it take?
Fitting into a prepared upstand usually takes a day. Forming a new opening in an existing roof, including making good inside, is often two to three days.
Is the survey in Rochester free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Do you fit flat rooflights in Rochester?
Yes. We survey and fit flat rooflights in Rochester and across Kent. Send your postcode and we will offer a survey date when we reply.
