What do frameless structural rooflights in Hythe involve?
For Hythe homes and buildings we offer frameless structural rooflights: minimal glass rooflights with no visible frame from inside. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Larger gardens in much of the South East mean deeper rear extensions, and deeper rooms need light from above rather than only from the doors. In Hythe, as anywhere, frameless structural rooflights are the usual choice for architect-led extensions and long slots of light over islands or along party walls.
Hythe sits about 5 km from Southampton and 9 km from Totton, and we cover the whole SO45 postcode district and the roads in between.
Choices for your Hythe project
- Solar-control coatings
- Butt-jointed runs for long openings
- Triple glazing
- Low-iron extra-clear glass
- Heated glass on some ranges
- Clean modern detail for architect-led schemes
- Can run along party walls and side returns
Before you order: points to check
- The internal finish (plaster, shadow gap) is agreed before order
- Large panes need lifting gear and access planning
Planning and building rules for Hythe
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Read the planning permission guide before you commit to a design.
Guide prices for Hythe
Prices below are shown including and excluding VAT. In Hythe, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
From enquiry to finished job
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Hythe address.
- Measure and check. A surveyor visits Hythe, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Neighbouring towns
Related work in Hythe
Frameless structural rooflights in Hythe: questions
Can it open?
Some frameless designs include a sliding or hinged opening element, but most are fixed. Pair with an opening unit if you need ventilation.
Can a frameless rooflight be walked on?
Only if it is specified as a walk-on unit. Most frameless rooflights are for light only.
Will I see the edge of the glass?
From inside, the reveal is finished up to the glass so the edge is hidden. From outside you will see the glass and its edge seal.
Do I need to be at home for the survey in Hythe?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Is the survey in Hythe free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
