Frameless structural rooflights for Shanklin: the essentials
Our frameless structural rooflights service in Shanklin covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Period cottages and conservation-area streets are common in the South East, so slim conservation rooflights are often the right choice. Frameless structural rooflights suit rooms where you want sky without a visible frame.
Jobs in Shanklin are planned around access: whether the roof can be reached from the garden, whether a hoist or crane is needed, and where we can park. We check this when we measure.
Specification options
- Low-iron extra-clear glass
- Triple glazing
- Shadow-gap or plastered reveal
- Solar-control coatings
- Butt-jointed runs for long openings
- Long, slim or very large formats
- Clean modern detail for architect-led schemes
What to check first
- Tolerances are tight — the opening must be built square and to size
- Structural glass specification comes from the manufacturer
Do you need permission in Shanklin?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Read the planning permission guide before you commit to a design.
Frameless structural rooflights prices in Shanklin
Prices below are shown including and excluding VAT. In Shanklin, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
From enquiry to finished job
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Shanklin, measures and checks structure and access.
- Agree the quote. You approve the specification and price before anything is ordered.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Frameless structural rooflights near Shanklin
More we do in Shanklin
Questions about frameless structural rooflights in Shanklin
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Does it cost more?
Usually, because the glass is larger and heavier and the finish needs tighter tolerances. The price table shows typical ranges.
Will I see the edge of the glass?
From inside, the reveal is finished up to the glass so the edge is hidden. From outside you will see the glass and its edge seal.
Is the survey in Shanklin free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Do I need to be at home for the survey in Shanklin?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
