Frameless structural rooflights in Strood: what is involved?
Our frameless structural rooflights service in Strood covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Across the South East, single-storey kitchen extensions on 1930s semis and post-war detached houses are where most flat rooflights and lanterns go. Typical uses for frameless structural rooflights include architect-led extensions and long slots of light over islands or along party walls.
Jobs in Strood are planned around access: whether the roof can be reached from the garden, whether a hoist or crane is needed, and where we can park. We check this when we measure.
Specification options
- Triple glazing
- Low-iron extra-clear glass
- Shadow-gap or plastered reveal
- Solar-control coatings
- Heated glass on some ranges
- Double or triple glazed structural units
- Solar-control and low-iron glass options
What to check first
- Large panes need lifting gear and access planning
- Structural glass specification comes from the manufacturer
Planning, building control and Strood
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Strood
Guide prices for frameless structural rooflights in Strood are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
The process, step by step
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Strood address.
- Measure and check. A surveyor visits Strood, measures and checks structure and access.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Nearby towns
Related work in Strood
Common questions
Can it open?
Some frameless designs include a sliding or hinged opening element, but most are fixed. Pair with an opening unit if you need ventilation.
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Is frameless glass as strong as a framed rooflight?
Yes — it is structural glass designed for the job. The support is hidden rather than missing.
Is the survey in Strood free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Do you fit frameless structural rooflights in Strood?
Yes. We survey and fit frameless structural rooflights in Strood and across Kent. Send your postcode and we will offer a survey date when we reply.
