What do frameless structural rooflights in Epsom involve?
Our frameless structural rooflights service in Epsom covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Across the South East, single-storey kitchen extensions on 1930s semis and post-war detached houses are where most flat rooflights and lanterns go. Typical uses for frameless structural rooflights include rooms where you want sky without a visible frame.
We work across Surrey, including Epsom, and in neighbouring towns such as Ewell and Banstead. Access, parking and how the glass reaches the roof are all checked at the survey.
What you can choose
- Low-iron extra-clear glass
- Triple glazing
- Shadow-gap or plastered reveal
- Heated glass on some ranges
- Butt-jointed runs for long openings
- Can run along party walls and side returns
- Long, slim or very large formats
What to check first
- Structural glass specification comes from the manufacturer
- Large panes need lifting gear and access planning
Planning, building control and Epsom
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Read the planning permission guide before you commit to a design.
Guide prices for Epsom
These are typical supply-and-fit ranges. For an address in Epsom, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
The process, step by step
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Frameless structural rooflights near Epsom
More we do in Epsom
Frameless structural rooflights in Epsom: questions
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Does it cost more?
Usually, because the glass is larger and heavier and the finish needs tighter tolerances. The price table shows typical ranges.
Is frameless glass as strong as a framed rooflight?
Yes — it is structural glass designed for the job. The support is hidden rather than missing.
Will I need planning permission in Epsom?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge.
Do I need to be at home for the survey in Epsom?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
