How we approach frameless structural rooflights in Felling
We handle frameless structural rooflights across Tyne and Wear, including Felling. In short: minimal glass rooflights with no visible frame from inside. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Coastal exposure along the North East means we look closely at frame finishes and seals. In Felling, as anywhere, frameless structural rooflights are the usual choice for rooms where you want sky without a visible frame.
We work across Tyne and Wear, including Felling, and in neighbouring towns such as Gateshead and Newcastle upon Tyne. Access, parking and how the glass reaches the roof are all checked at the survey.
Options we can specify in Felling
- Triple glazing
- Shadow-gap or plastered reveal
- Butt-jointed runs for long openings
- Low-iron extra-clear glass
- Solar-control coatings
- Solar-control and low-iron glass options
- Long, slim or very large formats
Before you order: points to check
- Tolerances are tight — the opening must be built square and to size
- The internal finish (plaster, shadow gap) is agreed before order
Planning, building control and Felling
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
Our planning guide covers each nation in more detail.
Frameless structural rooflights prices in Felling
Prices below are shown including and excluding VAT. In Felling, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
How the job runs
- Tell us what you have. Send the NE10 postcode, a rough size and a couple of photos.
- Measure and check. A surveyor visits Felling, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Neighbouring towns
Other services in Felling
Common questions
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Does it cost more?
Usually, because the glass is larger and heavier and the finish needs tighter tolerances. The price table shows typical ranges.
Can it open?
Some frameless designs include a sliding or hinged opening element, but most are fixed. Pair with an opening unit if you need ventilation.
Will I need planning permission in Felling?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
How do I book a survey in Felling?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
