How we approach frameless structural rooflights in Burgess Hill
Our frameless structural rooflights service in Burgess Hill covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Period cottages and conservation-area streets are common in the South East, so slim conservation rooflights are often the right choice. In Burgess Hill, as anywhere, frameless structural rooflights are the usual choice for rooms where you want sky without a visible frame.
We work across West Sussex, including Burgess Hill, and in neighbouring towns such as Haywards Heath and Portslade. Access, parking and how the glass reaches the roof are all checked at the survey.
What you can choose
- Shadow-gap or plastered reveal
- Low-iron extra-clear glass
- Butt-jointed runs for long openings
- Heated glass on some ranges
- Solar-control coatings
- Long, slim or very large formats
- Solar-control and low-iron glass options
What to check first
- Tolerances are tight — the opening must be built square and to size
- The internal finish (plaster, shadow gap) is agreed before order
Planning and building rules for Burgess Hill
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
Frameless structural rooflights prices in Burgess Hill
These are typical supply-and-fit ranges. For an address in Burgess Hill, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
How the job runs
- Tell us what you have. Send the RH15 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Neighbouring towns
Related work in Burgess Hill
Questions about frameless structural rooflights in Burgess Hill
Does it cost more?
Usually, because the glass is larger and heavier and the finish needs tighter tolerances. The price table shows typical ranges.
Is frameless glass as strong as a framed rooflight?
Yes — it is structural glass designed for the job. The support is hidden rather than missing.
Can it open?
Some frameless designs include a sliding or hinged opening element, but most are fixed. Pair with an opening unit if you need ventilation.
How do I book a survey in Burgess Hill?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Can you work alongside my builder in Burgess Hill?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
