How we approach flat rooflights in Burgess Hill
Flat rooflights in Burgess Hill means fixed double or triple glazed rooflights for flat roofs and extensions. We cover the RH15 district and the rest of West Sussex, with a survey before any price is fixed.
Across the South East, single-storey kitchen extensions on 1930s semis and post-war detached houses are where most flat rooflights and lanterns go. Flat rooflights suit kitchen extensions, side returns and flat-roofed back rooms.
Burgess Hill sits about 5 km from Haywards Heath and 14 km from Portslade, and we cover the whole RH15 postcode district and the roads in between.
What you can choose
- Insulated kerb or timber upstand built to suit
- Rain sensor if paired with an opening unit
- Plastered or lined internal reveal
- Solar-control or self-cleaning outer pane
- Double or triple glazing
- Double or triple glazed with a warm-edge spacer
- Even, top-down daylight across the whole room
What to check first
- Needs a properly formed upstand — usually at least 150 mm above the finished roof surface (check the manufacturer's figure)
- The roof membrane must be dressed up the upstand before the unit goes on
Do you need permission in Burgess Hill?
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
See our building regulations guide for U-values, glazing limits and self-certification.
Flat rooflights prices in Burgess Hill
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
What happens next
- Tell us what you have. Send the RH15 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Neighbouring towns
Related work in Burgess Hill
Questions about flat rooflights in Burgess Hill
Will it make the room too hot?
A big unglazed-to-sky area can add solar gain in summer. Solar-control glass, a blind, or pairing a fixed unit with an opening one keeps it comfortable.
Can you fit into my existing flat roof?
Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.
How long does it take?
Fitting into a prepared upstand usually takes a day. Forming a new opening in an existing roof, including making good inside, is often two to three days.
Can you work alongside my builder in Burgess Hill?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
Will I need planning permission in Burgess Hill?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
