How we approach sliding rooflights in Burgess Hill
Our sliding rooflights service in Burgess Hill covers box rooflights whose glass lid slides back for walk-out roof access. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Many South East homes have been extended more than once, and an old dome over an earlier extension is often due for replacement. In Burgess Hill, as anywhere, sliding rooflights are the usual choice for staircases that rise to a roof terrace.
Burgess Hill sits about 5 km from Haywards Heath and 14 km from Portslade, and we cover the whole RH15 postcode district and the roads in between.
Choices for your Burgess Hill project
- Rain sensor
- Electric drive with safety edge
- Integrated balustrade on some ranges
- Box (glazed sides) or flat sliding lid
- Double or triple glazing
- Full-width, walk-out access to a roof terrace
- Daylight down the stair when closed
What to check first
- Needs space on the roof for the lid to slide clear
- The stair opening and headroom must meet Building Regulations
Consents for sliding rooflights in Burgess Hill
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Read the planning permission guide before you commit to a design.
What do sliding rooflights cost in Burgess Hill?
Guide prices for sliding rooflights in Burgess Hill are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large box slider with electric drive | £11,995 – £20,395 | £9,995 – £16,995 |
| Standard box slider Typical | £8,995 – £13,195 | £7,495 – £10,995 |
| Flat sliding lid | £7,195 – £9,595 | £5,995 – £7,995 |
How the job runs
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Burgess Hill address.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Agree the quote. You approve the specification and price before anything is ordered.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Neighbouring towns
Related work in Burgess Hill
Questions about sliding rooflights in Burgess Hill
What if it is raining?
Fitted with a rain sensor, an electric unit closes automatically. Most also have a manual override for power cuts.
Can children open it?
Controls can be key-switched or placed out of reach. We will set the controls up to suit the household.
Does it need planning permission?
A box unit that projects above the roof plane can need planning permission, especially on the front of a house or in a conservation area. We check before you order.
Will I need planning permission in Burgess Hill?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
Is the survey in Burgess Hill free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
