What does skylight installation in Burgess Hill involve?
For Burgess Hill homes and buildings we offer skylight installation: survey, supply and fit — new openings, extensions and fit-only work. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Larger gardens in much of the South East mean deeper rear extensions, and deeper rooms need light from above rather than only from the doors. Typical uses for skylight installation include new extensions, new openings and fit-only jobs.
We work across West Sussex, including Burgess Hill, and in neighbouring towns such as Haywards Heath and Portslade. Access, parking and how the glass reaches the roof are all checked at the survey.
Choices for your Burgess Hill project
- Internal plaster reveal
- New openings with joist trimming
- Supply and fit
- Upstands and flashings
- Fit only (customer-supplied units)
- New openings in existing roofs
- Fixed price in writing before work
Before you order: points to check
- Fit-only work relies on the product being suitable and complete
- Work at height is planned with suitable access
Planning, building control and Burgess Hill
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
What does skylight installation cost in Burgess Hill?
Guide prices for skylight installation in Burgess Hill are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| New opening in an existing roof, supply and fit | £2,395 – £5,395 | £1,995 – £4,495 |
| Supply and fit into a new extension Typical | £1,435 – £3,595 | £1,195 – £2,995 |
| Fit only, customer-supplied unit | £595 – £1,195 | £495 – £995 |
What happens next
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Neighbouring towns
Other services in Burgess Hill
Skylight installation in Burgess Hill: questions
Do I need a structural engineer?
For new openings that cut joists or rafters, a structural check is sensible and building control may ask for calculations.
How long does installation take?
Fitting into a prepared upstand takes about a day. A new opening in an existing roof, including making good, often takes two to three days.
Who handles building control?
We tell you which route applies — building control approval, a building warrant in Scotland, or in England and Wales self-certification by a registered competent person — and supply the product data.
Do you offer skylight installation in Burgess Hill?
Yes. We carry out skylight installation in Burgess Hill and across West Sussex. Send your postcode and we will offer a survey date when we reply.
Will I need planning permission in Burgess Hill?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge.
