What do rooflight upstands & kerbs in Buckley involve?
For Buckley homes and buildings we offer rooflight upstands & kerbs: insulated kerbs built and waterproofed to suit your rooflight. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Wales sees a lot of wind-driven rain, particularly in the west, so upstand height and flashing laps matter more than anywhere. Typical uses for rooflight upstands & kerbs include roofs where the old kerb is low, cold or leaking.
From Buckley to Hawarden, Deeside and Flint, the same survey-first process applies: measure, specify, fix the price, then fit.
Options we can specify in Buckley
- Timber upstands with insulation
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Proprietary insulated kerbs
- Internal plaster-box linings
- Raised upstands for deep green or ballasted roofs
- Correct height above the finished roof
- Membrane dressed up and sealed
Things we check at survey
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Upstand size must match the unit within a tight tolerance
Planning and building rules for Buckley
In Wales a rooflight on a house is usually permitted development if it stands no more than 15 cm proud of the roof, except on protected land such as conservation areas and National Parks, where permission is needed. Listed buildings need listed building consent from the council, and flats have no householder permitted development rights.
Approved Document L in Wales (2022 edition) sets 2.2 W/m²K for rooflights, measured horizontally, and 1.4 W/m²K or Band B for roof windows in existing homes. Wales also has its own overheating rules (Part O) for new homes, in force since November 2022.
Read the planning permission guide before you commit to a design.
What do rooflight upstands & kerbs cost in Buckley?
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
What happens next
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Nearby towns
Related work in Buckley
Rooflight upstands & kerbs in Buckley: questions
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
How do I book a survey in Buckley?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Is the survey in Buckley free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
