How we approach rooflight upstands & kerbs in Fleetwood
For Fleetwood homes and buildings we offer rooflight upstands & kerbs: insulated kerbs built and waterproofed to suit your rooflight. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
The North West gets more rain than most of England, so upstand height, membrane detailing and rain sensors on opening units are not optional extras. Think of rooflight upstands & kerbs for new flat-roof openings and rooflight replacements.
Jobs in Fleetwood are planned around access: whether the roof can be reached from the garden, whether a hoist or crane is needed, and where we can park. We check this when we measure.
What you can choose
- Raised upstands for deep green or ballasted roofs
- Upstand repairs and rebuilds
- Timber upstands with insulation
- Proprietary insulated kerbs
- Internal plaster-box linings
- Matched to your roof covering
- Correct height above the finished roof
Things we check at survey
- Membrane compatibility with the rooflight's sealants
- Upstand size must match the unit within a tight tolerance
Planning and building rules for Fleetwood
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
Our planning guide covers each nation in more detail.
Rooflight upstands & kerbs prices in Fleetwood
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Tell us what you have. Send the FY7 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
Other services in Fleetwood
Rooflight upstands & kerbs in Fleetwood: questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
Do I need to be at home for the survey in Fleetwood?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Is the survey in Fleetwood free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
