Rooflight upstands & kerbs for Bedworth: the essentials
Our rooflight upstands & kerbs service in Bedworth covers insulated kerbs built and waterproofed to suit your rooflight. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Midlands housing is a mix of Victorian terraces, inter-war semis and newer estates, and rear kitchen extensions with flat rooflights are a common upgrade. Rooflight upstands & kerbs suit new flat-roof openings and rooflight replacements.
Neighbouring towns include Nuneaton (5 km) and Coventry (9 km). We offer a survey date when we reply to your enquiry.
Options we can specify in Bedworth
- Upstand repairs and rebuilds
- Internal plaster-box linings
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Raised upstands for deep green or ballasted roofs
- Proprietary insulated kerbs
- Membrane dressed up and sealed
- Fixings and falls agreed with the rooflight maker
What to check first
- Upstand size must match the unit within a tight tolerance
- Insulation continuity around the upstand affects condensation
Planning and building rules for Bedworth
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
What do rooflight upstands & kerbs cost in Bedworth?
These are typical supply-and-fit ranges. For an address in Bedworth, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
What happens next
- Tell us what you have. Send the CV12 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Rooflight upstands & kerbs near Bedworth
Other services in Bedworth
Rooflight upstands & kerbs in Bedworth: questions
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Do I need to be at home for the survey in Bedworth?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Will I need planning permission in Bedworth?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
