What do rooflight upstands & kerbs in Brighouse involve?
For Brighouse homes and buildings we offer rooflight upstands & kerbs: insulated kerbs built and waterproofed to suit your rooflight. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Conservation areas and stone villages across Yorkshire often call for conservation rooflights in slate or stone-slate roofs. In Brighouse, as anywhere, rooflight upstands & kerbs are the usual choice for roofs where the old kerb is low, cold or leaking.
From Brighouse to Halifax, Cleckheaton and Huddersfield, the same survey-first process applies: measure, specify, fix the price, then fit.
What you can choose
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Raised upstands for deep green or ballasted roofs
- Internal plaster-box linings
- Upstand repairs and rebuilds
- Proprietary insulated kerbs
- Insulated to avoid a cold bridge
- Correct height above the finished roof
Before you order: points to check
- Insulation continuity around the upstand affects condensation
- Upstand size must match the unit within a tight tolerance
Do you need permission in Brighouse?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
What do rooflight upstands & kerbs cost in Brighouse?
These are typical supply-and-fit ranges. For an address in Brighouse, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
The process, step by step
- Tell us what you have. Send the HD6 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Rooflight upstands & kerbs near Brighouse
Other services in Brighouse
Rooflight upstands & kerbs in Brighouse: questions
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
Do I need to be at home for the survey in Brighouse?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Is the survey in Brighouse free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
