What does skylight installation in Pembroke Dock involve?
For Pembroke Dock homes and buildings we offer skylight installation: survey, supply and fit — new openings, extensions and fit-only work. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Slate roofs, stone cottages and terraced valleys are typical across Wales, and slim rooflights that sit low in the slates suit them best. Think of skylight installation for builders' projects and retrofits into finished roofs.
From Pembroke Dock to Haverfordwest, Tenby and Carmarthen, the same survey-first process applies: measure, specify, fix the price, then fit.
Options we can specify in Pembroke Dock
- Upstands and flashings
- Supply and fit
- Fit only (customer-supplied units)
- New openings with joist trimming
- Internal plaster reveal
- Making good inside included
- New openings in existing roofs
Before you order: points to check
- Work at height is planned with suitable access
- Fit-only work relies on the product being suitable and complete
Do you need permission in Pembroke Dock?
Welsh householder permitted development (Class C) allows rooflights that project no more than 15 cm and sit no higher than the existing roof — but not in conservation areas, National Parks, AONBs or World Heritage Sites. Listed buildings need listed building consent from the council, and flats have no householder permitted development rights.
Approved Document L in Wales (2022 edition) sets 2.2 W/m²K for rooflights, measured horizontally, and 1.4 W/m²K or Band B for roof windows in existing homes. A revised Welsh Approved Document L takes effect on 4 March 2027; rooflights in new dwellings stay at 2.2 W/m²K.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Pembroke Dock
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| New opening in an existing roof, supply and fit | £2,395 – £5,395 | £1,995 – £4,495 |
| Supply and fit into a new extension Typical | £1,435 – £3,595 | £1,195 – £2,995 |
| Fit only, customer-supplied unit | £595 – £1,195 | £495 – £995 |
How the job runs
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Pembroke Dock, measures and checks structure and access.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
Related work in Pembroke Dock
Common questions
Do you work with builders?
Yes — on new extensions we fit to the builder's programme once the upstand or roof is ready.
Do I need a structural engineer?
For new openings that cut joists or rafters, a structural check is sensible and building control may ask for calculations.
Do you fit rooflights bought elsewhere?
Yes. We check the product and the opening first, and our workmanship terms cover the fitting rather than the product.
Can you work alongside my builder in Pembroke Dock?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
Do I need to be at home for the survey in Pembroke Dock?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
