Flat rooflights in Ulverston: what is involved?
Our flat rooflights service in Ulverston covers fixed double or triple glazed rooflights for flat roofs and extensions. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Rear kitchen extensions on North West semis often have small domes from decades ago that leak or have yellowed. Think of flat rooflights for landings, bathrooms and rear extensions with flat roofs.
Ulverston sits about 13 km from Barrow-in-Furness and 21 km from Morecambe, and we cover the whole LA12 postcode district and the roads in between.
Specification options
- Frame colours: anthracite, black, white or RAL
- Insulated kerb or timber upstand built to suit
- Plastered or lined internal reveal
- Rain sensor if paired with an opening unit
- Square, rectangular or long-format sizes
- Pairs with an opening unit where you also need ventilation
- Even, top-down daylight across the whole room
Things we check at survey
- The roof membrane must be dressed up the upstand before the unit goes on
- Needs a properly formed upstand — usually at least 150 mm above the finished roof surface (check the manufacturer's figure)
Planning and building rules for Ulverston
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
See our building regulations guide for U-values, glazing limits and self-certification.
What do flat rooflights cost in Ulverston?
Guide prices for flat rooflights in Ulverston are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
The process, step by step
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Ulverston, measures and checks structure and access.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Nearby towns
More we do in Ulverston
Flat rooflights in Ulverston: questions
Can a flat rooflight be walked on?
Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.
Can you fit into my existing flat roof?
Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.
Double or triple glazing?
Double glazing suits most domestic jobs. Triple glazing improves thermal performance and cuts noise from rain, which is worth it over bedrooms or where the energy calculation is tight.
How do I book a survey in Ulverston?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Can you work alongside my builder in Ulverston?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
