What do flat rooflights in Tenby involve?
For Tenby homes and buildings we offer flat rooflights: fixed double or triple glazed rooflights for flat roofs and extensions. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Many Welsh homes have older single-storey rear extensions where a glass rooflight brightens a dark kitchen. Flat rooflights suit landings, bathrooms and rear extensions with flat roofs.
Jobs in Tenby are planned around access: whether the roof can be reached from the garden, whether a hoist or crane is needed, and where we can park. We check this when we measure.
Options we can specify in Tenby
- Frame colours: anthracite, black, white or RAL
- Rain sensor if paired with an opening unit
- Solar-control or self-cleaning outer pane
- Double or triple glazing
- Integral or fitted blinds
- Inner pane laminated for safety overhead
- Fixed units are simple, quiet and low-maintenance
Before you order: points to check
- Needs a properly formed upstand — usually at least 150 mm above the finished roof surface (check the manufacturer's figure)
- New openings in an existing roof need a structural check on joists
Planning and building rules for Tenby
Welsh householder permitted development (Class C) allows rooflights that project no more than 15 cm and sit no higher than the existing roof — but not in conservation areas, National Parks, AONBs or World Heritage Sites. A side-facing rooflight within 10.5 m of the boundary must be obscure-glazed, and non-opening unless the opening part is more than 1.7 m above the floor.
Welsh Building Regulations expect new or replacement rooflights to reach 2.2 W/m²K and roof windows 1.4 W/m²K or a Band B rating. Wales also has its own overheating rules (Part O) for new homes, in force since November 2022.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Tenby
Guide prices for flat rooflights in Tenby are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
The process, step by step
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Tenby address.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Neighbouring towns
Other services in Tenby
Questions about flat rooflights in Tenby
Can you fit into my existing flat roof?
Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.
Do flat rooflights leak?
A well-fitted flat rooflight should not leak. Leaks almost always come from the upstand or membrane detailing, not the glass unit, which is why the upstand height and the way the roof covering is dressed up and under the frame matter more than the brand.
Can a flat rooflight be walked on?
Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.
Can you work alongside my builder in Tenby?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
Is the survey in Tenby free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
