Flat rooflights for Cromer: the essentials
For Cromer homes and buildings we offer flat rooflights: fixed double or triple glazed rooflights for flat roofs and extensions. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Many homes in the East have low-pitched roofs on later extensions, which are better served by flat rooflights than pitched roof windows. Flat rooflights suit kitchen extensions, side returns and flat-roofed back rooms.
Jobs in Cromer are planned around access: whether the roof can be reached from the garden, whether a hoist or crane is needed, and where we can park. We check this when we measure.
What you can choose
- Insulated kerb or timber upstand built to suit
- Frame colours: anthracite, black, white or RAL
- Plastered or lined internal reveal
- Double or triple glazing
- Rain sensor if paired with an opening unit
- Pairs with an opening unit where you also need ventilation
- Double or triple glazed with a warm-edge spacer
What to check first
- Rooflights count toward glazing in an extension, which matters for Building Regulations energy and overheating rules
- The roof membrane must be dressed up the upstand before the unit goes on
Planning, building control and Cromer
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
What do flat rooflights cost in Cromer?
Guide prices for flat rooflights in Cromer are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
The process, step by step
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Cromer address.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
Related work in Cromer
Questions about flat rooflights in Cromer
Double or triple glazing?
Double glazing suits most domestic jobs. Triple glazing improves thermal performance and cuts noise from rain, which is worth it over bedrooms or where the energy calculation is tight.
How long does it take?
Fitting into a prepared upstand usually takes a day. Forming a new opening in an existing roof, including making good inside, is often two to three days.
Will it make the room too hot?
A big unglazed-to-sky area can add solar gain in summer. Solar-control glass, a blind, or pairing a fixed unit with an opening one keeps it comfortable.
Is the survey in Cromer free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Do I need to be at home for the survey in Cromer?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
