Free survey for new installsFixed written quoteEngland, Wales, Scotland & NI
Call 0800 088 6248
SkylightCompany.uk
Flat rooflights · Northamptonshire

Flat rooflights in Corby

From the first measure to the finished reveal, flat rooflights in Corby under one contract.

  • Planning and building-regs points explained
  • Fixed price in writing before work starts
  • Upstand, flashing and making good set out in your quote

Quote for Corby

Free survey for new installs · we aim to reply within one working day

Enter a UK postcode.
Choose an option.
Enter your name.
Enter a phone number we can call.
Check the email address.

We use your details to answer this enquiry and arrange your survey. They pass through our form, chat and hosting providers and are shared only with the surveyor or installer working for us on your job — see our privacy notice.

NN17Postcode district
NorthamptonshireCounty / region
10 kmto Uppingham
£1,195Guide price from (inc VAT)

Flat rooflights in Corby: what is involved?

Our flat rooflights service in Corby covers fixed double or triple glazed rooflights for flat roofs and extensions. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.

Midlands housing is a mix of Victorian terraces, inter-war semis and newer estates, and rear kitchen extensions with flat rooflights are a common upgrade. In Corby, as anywhere, flat rooflights are the usual choice for kitchen extensions, side returns and flat-roofed back rooms.

Corby sits about 10 km from Uppingham and 11 km from Kettering, and we cover the whole NN17 postcode district and the roads in between.

Specification options

  • Square, rectangular or long-format sizes
  • Insulated kerb or timber upstand built to suit
  • Plastered or lined internal reveal
  • Solar-control or self-cleaning outer pane
  • Integral or fitted blinds
  • Double or triple glazed with a warm-edge spacer
  • Even, top-down daylight across the whole room

What to check first

  • Rooflights count toward glazing in an extension, which matters for Building Regulations energy and overheating rules
  • New openings in an existing roof need a structural check on joists

Planning, building control and Corby

Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.

For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.

See our building regulations guide for U-values, glazing limits and self-certification.

What do flat rooflights cost in Corby?

Guide prices for flat rooflights in Corby are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.

OptionGuide price inc VATEx VAT
Large or triple glazed (1500 × 2500 mm and up)£2,395 – £4,195£1,995 – £3,495
Mid-size double glazed (1000 × 2000 mm) Typical£1,675 – £2,395£1,395 – £1,995
Small double glazed (up to 1000 × 1000 mm)£1,195 – £1,795£995 – £1,495

What happens next

  1. Tell us what you have. Send the NN17 postcode, a rough size and a couple of photos.
  2. Survey. We measure the opening, check the roof build-up and agree the options.
  3. Agree the quote. You approve the specification and price before anything is ordered.
  4. Fitting and handover. We install, clean down and leave product and warranty documents.

Flat rooflights near Corby

Related work in Corby

Flat rooflights in Corby: questions

Can a flat rooflight be walked on?

Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.

Can you fit into my existing flat roof?

Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.

How long does it take?

Fitting into a prepared upstand usually takes a day. Forming a new opening in an existing roof, including making good inside, is often two to three days.

Can you work alongside my builder in Corby?

Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.

How do I book a survey in Corby?

Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.

Free survey · fixed written quote

Ready for more daylight?

Tell us where you are and what you have in mind. We aim to reply within one working day.

CallFree quote