How we approach skylight installation in Redland
For Redland homes and buildings we offer skylight installation: survey, supply and fit — new openings, extensions and fit-only work. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Stone cottages, slate roofs and conservation areas are common in the South West, and conservation-profile rooflights keep the roofline quiet. Skylight installation suits new extensions, new openings and fit-only jobs.
Redland sits about 2 km from Clifton and 2 km from Bristol, and we cover the whole BS6 postcode district and the roads in between.
What you can choose
- Electrics coordination
- Supply and fit
- Fit only (customer-supplied units)
- Internal plaster reveal
- Upstands and flashings
- Fit-only for units you have bought
- Free survey for new installations
Things we check at survey
- Structural changes may need an engineer's check
- Building Regulations approval (a building warrant in Scotland) may be needed
Consents for skylight installation in Redland
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
Read the planning permission guide before you commit to a design.
What does skylight installation cost in Redland?
Prices below are shown including and excluding VAT. In Redland, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| New opening in an existing roof, supply and fit | £2,395 – £5,395 | £1,995 – £4,495 |
| Supply and fit into a new extension Typical | £1,435 – £3,595 | £1,195 – £2,995 |
| Fit only, customer-supplied unit | £595 – £1,195 | £495 – £995 |
How the job runs
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Neighbouring towns
More we do in Redland
Common questions
Do you work with builders?
Yes — on new extensions we fit to the builder's programme once the upstand or roof is ready.
Do I need a structural engineer?
For new openings that cut joists or rafters, a structural check is sensible and building control may ask for calculations.
Is the survey free?
Yes, for new installations. Repair visits are charged.
Will I need planning permission in Redland?
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof.
Is the survey in Redland free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
