Frameless structural rooflights in Tenby: what is involved?
We handle frameless structural rooflights across Dyfed, including Tenby. In short: minimal glass rooflights with no visible frame from inside. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Wales sees a lot of wind-driven rain, particularly in the west, so upstand height and flashing laps matter more than anywhere. Frameless structural rooflights suit rooms where you want sky without a visible frame.
Tenby sits about 16 km from Pembroke Dock and 23 km from Haverfordwest, and we cover the whole SA70 postcode district and the roads in between.
What you can choose
- Shadow-gap or plastered reveal
- Triple glazing
- Solar-control coatings
- Butt-jointed runs for long openings
- Heated glass on some ranges
- Long, slim or very large formats
- Solar-control and low-iron glass options
Before you order: points to check
- Large panes need lifting gear and access planning
- The internal finish (plaster, shadow gap) is agreed before order
Planning, building control and Tenby
Welsh householder permitted development (Class C) allows rooflights that project no more than 15 cm and sit no higher than the existing roof — but not in conservation areas, National Parks, AONBs or World Heritage Sites. A side-facing rooflight within 10.5 m of the boundary must be obscure-glazed, and non-opening unless the opening part is more than 1.7 m above the floor.
Welsh Building Regulations expect new or replacement rooflights to reach 2.2 W/m²K and roof windows 1.4 W/m²K or a Band B rating. A revised Welsh Approved Document L takes effect on 4 March 2027; rooflights in new dwellings stay at 2.2 W/m²K.
Our planning guide covers each nation in more detail.
Frameless structural rooflights prices in Tenby
Prices below are shown including and excluding VAT. In Tenby, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
The process, step by step
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Frameless structural rooflights near Tenby
More we do in Tenby
Frameless structural rooflights in Tenby: questions
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Can it open?
Some frameless designs include a sliding or hinged opening element, but most are fixed. Pair with an opening unit if you need ventilation.
Can a frameless rooflight be walked on?
Only if it is specified as a walk-on unit. Most frameless rooflights are for light only.
Do I need to be at home for the survey in Tenby?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Is the survey in Tenby free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
