What does skylight installation in London involve?
Skylight installation in London means survey, supply and fit — new openings, extensions and fit-only work. We cover the EC1A district and the rest of Greater London, with a survey before any price is fixed.
Party walls are a fact of life in London terraces, and rooflights close to a shared wall need detailing that keeps the neighbour's side dry too. Typical uses for skylight installation include builders' projects and retrofits into finished roofs.
We cover all of London and the EC1A district, and nearby Pimlico and Islington.
Specification options
- Upstands and flashings
- Fit only (customer-supplied units)
- New openings with joist trimming
- Internal plaster reveal
- Supply and fit
- Making good inside included
- New openings in existing roofs
Before you order: points to check
- Building Regulations approval (a building warrant in Scotland) may be needed
- Fit-only work relies on the product being suitable and complete
Planning and building rules for London
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
What does skylight installation cost in London?
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| New opening in an existing roof, supply and fit | £2,395 – £5,395 | £1,995 – £4,495 |
| Supply and fit into a new extension Typical | £1,435 – £3,595 | £1,195 – £2,995 |
| Fit only, customer-supplied unit | £595 – £1,195 | £495 – £995 |
What happens next
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
Other services in London
Questions about skylight installation in London
Who handles building control?
We tell you which route applies — building control approval, a building warrant in Scotland, or in England and Wales self-certification by a registered competent person — and supply the product data.
Do I need a structural engineer?
For new openings that cut joists or rafters, a structural check is sensible and building control may ask for calculations.
How long does installation take?
Fitting into a prepared upstand takes about a day. A new opening in an existing roof, including making good, often takes two to three days.
Do I need to be at home for the survey in London?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Can you work alongside my builder in London?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
